Description

Holding and Cutting Plier

for cutting Strips And Rods While Sewing.

This is a must-have tool for anyone who cuts tubing or rods with a jeweller’s saw.

Say goodbye to the clamps and scissors that have been holding you up!

The Tube Holding pliers grip your tubing firmly without damaging it, so it’s easier to cut. Desire: The Tube Cutting Pliers Nylon Jaws can cut any size of tubing in a clean and easy way

Use these V-grooved pliers for a clean, straight cut every time!

If you use a jeweller‘s saw to cut tubing, this is a must-have-have tool! V-grooved jaws hold tubing, rod and strip securely and safely.

The narrow slot through the centre of the jaws guides the saw blade, so you get a clean, straight cut every time! Works with tubes, strips and rods. Includes comfortable, cushioned handles and spring-loaded-loaded box joint construction for years of use. 7 inches long. Saw it available separately.

The jaws of these unique pliers are specially designed to hold tubing or small rods steady while being cut with a jeweller’s’s saw, ensuring a perfectly flush-cut end without collapsing the tube.

Three corresponding notches in each jaw hold tubing ranging from 2 to 10mm OD. A 1mm slot along the length of the jaws fits a jeweler’s saw blade; set your blade in the slot and saw through the tubing held in the notches in a perfectly straight cut.

tubes slots and hold rods

• These pliers have a box joint; one half of the joint surrounds the other half, and the pivot is contained within. This joint holds its alignment far longer than a lap joint but allows the tool to open only as far as the box size.

hold cut tubes slots

The double-leaf spring consists of flat, tempered metal tabs attached to the inside of each tool handle, positioned to meet and hold the handles apart (and the jaws open) until they are squeezed closed; the spring delivers a fast, strong rebound for improved productivity.

• The plastic-dipped handles deliver a comfortable, secure grip.

Trick and Tips for using a Jewellers saw

Say goodbye to crooked cuts! Holding and Cutting Plier are designed specifically for cutting tubing. These pliers hold tubes securely and safely while guiding the saw blade so that every cut is straight and clean. Buy today at Burfitt Tools Australia.

you can use wire cutters  and cutting pliers hold cut tubes.

the idea is thats the tube cutting pliers hold cut and the pliers hold cut tubes slots see also Mini Saw Frame with Alluminium Handle miniature saw frame

How Should One Use a Jeweller’s Saw to Cut Tubing?

Introduction: What is a Jeweller’s Saw and How Does it Work?

A Jeweller’s Saw is a metal-cutting saw that is used to cut tubing, wire, and other metal pieces.

Jeweller’s saws are often used in jewellery making. They are also used to cut tubing for plumbing.

Nylon tube Holding Plier

Aspects to Consider when Choosing a Jewellers Saw for Tubing Cutting

Jewellers saws are used for cutting the tubing. There are many aspects to consider when choosing a jewellers saw for cutting tubing. The first aspect is the blade size.

The blade size should be such that it can cut through the tubing with ease. The second aspect is the teeth per inch or TPI. The teeth per inch should be such that it can cut through the tubing with ease and provide a clean cut.

The third aspect to consider is whether you want a left-handed or right-handed jewellers saw for cutting tubing.

Left-handed blades are used by people who are right-handed and vice versa, as this ensures that your hand does not get in the way of your blade while you’re working on your project.

The Proper Way to Hold the Tube in Place When Cutting with a Jeweller’s Saw

The proper way to hold the tube in place when cutting with a jeweller’s saw is to place it on a surface that will not deform, such as a piece of metal or a granite slab. If you want to cut tubing without the need for such surfaces, you can use an old-fashioned clamp.

It is important to hold the tube firmly in place when cutting with a jeweller’s saw because if it moves while you are cutting it may result in an uneven cut and will make things much more difficult for you.

In Conclusion – The Benefits of Using a Jeweller’s Saw to Cut Tubing

A jeweller’s saw is a diamond polishing tool that is used to cut a variety of materials including metal, plastic, and glass. It can also be used to cut tubing for use in jewellery making or other crafts.

A jeweller’s saw is an essential tool for any jeweller or craftsperson that works with small pieces of metal or glass.

Burfitt Tools jewellers saw.